Description

USB Powered Hot Fix Applicator Tool with Suction and 9 Tips

This handy Hot-Fix crystal applicator tool eliminates the need for batteries as it’s powered off USB. Simply connect the cord to any standard USB-C charger to run continuously. Perfect for applying hot-fix crystals in any brand including shimr, Preciosa, Swarovski and any other aftermarket crystals you may have.

Kit Includes:
– Hot Fix Applicator Tool
– Metal Tool Stand
– 9 Applicator Tips
– USB-C to USB-C Cable

Tip Sizes:
– SS4-6 (1.2-2.1mm)
– SS8-12 (2-3mm)
– SS16 (3.2-4mm)
– SS20 (4.2-5mm)
– SS30 (6-6.5mm)
– SS34 (7-7.5mm)
– SS40 (8-9mm)
– SS48 (9-10mm)
– Flat (For all non-round shapes)

To Use:
1. Screw the required tip size onto the tool
2. Connect a suitable USB-C power source
3. Hold down the power button for 5 seconds until the button illuminates.
4. Wait at least 30 seconds for tip to reach operating heat.
5. Briefly press the power button again to activate the suction feature. Brief presses will toggle suction on and off as required.
6. Pick up your crystal using the suction and move it into position.
7. Press and hold the crystal in place for 2-5 seconds or until secured in place.
8. Repeat steps 6 and 7 for all remaining crystals.
9. Turn off by holding the power button for 5 seconds.
10. Rest the hot fix tool on the included metal stand to cool and prevent damaging any surfaces with the hot tip.
11. Unplug the USB-C cable and rest the tool in the upright position until it has completely cooled before storing the device or changing the tip.

CAUTION:
The brass coloured metal tip gets extremely hot during operation. The stainless steel sheath also gets very hot. Avoid touching the metal parts during or soon after operation. Avoid physical contact with the metal parts of this tool and any surfaces while device is hot. Keep away from flammable or combustible surfaces at all times. Keep out of reach of children. THIS TOOL IS NOT A TOY! DANGER: Burn Risk. Small Parts present a Choking Hazard.

POWER SUPPLY
This tool includes a USB-C to USB-C cable. To operate the device, you will need a power supply. Compatible power supplies include high capacity lithium battery power banks, or a mains power adaptor to USB-C. You may also use a mains power adaprot to USB-A provided you have your own USB-A to USB-C cable. It’s important to note that this tool DOES NOT include any 240v mains powered plug, cable or transformer. DO NOT POWER OFF A PC, LAPTOP, PHONE OR OTHER DEVICE.