Description
Seal-All Contact Adhesive is the Mechanic’s Choice. Made by the creators of E6000.
Seal-All is the adhesive mechanics and hobbyists trust for all their automotive and garage repairs. It adheres with superior strength to most substrates and resists gasoline, oil, paint thinner and most solvents.
– Fast dry time – set in 2-3 minutes
– E-Z flow formula
– Gas & oil resistant
– Waterproof – bond remains secure even when exposed to water
– Abrasion resistant
– Temperature resistant – remains tough even in extreme temperatures
Follow these step-by-step directions when using Seal-All:
2. USE AS A SEALANT: Apply directly to clean, dry surface. Hold firmly until product sets. Additional coats may be applied. Allow each layer to dry thoroughly. On leaking objects under pressure, tape over Seal-Al® with Duct® or masking tape. Additional coats may be applied over tape.
3. USE AS A CONTACT ADHESIVE: Spread coating on each surface to be joined together. Allow to harden for 5-10 minutes, then press both surfaces together. Seal-All hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact and sufficient pressure is exerted to create full contact between both surfaces.
4. Seal-All will set in about 2-3 minutes and reaches full cure in 2-6 hours. Cure time increases with lower temperatures and decreases with higher temperatures.
5. Paint over Seal-All for UV resistance.
6. Keep threads at the neck of the tube free of Seal-All residue.
7. Store unused Seal-All at room temperature with cap tightened.
FAQS:
Seal-All is resistant to gasoline, oil, paint thinner, and most solvents. Seal-All is also water resistant immediately upon applications.
Seal-All adheres with superior strength to all substrates and materials except paper, cardboard and Styrofoam™. Always test a small area before full use.
Seal-All will set in 2-3 minutes and reaches full-cure in 2-6 hours. (Note: temperature and humidity will affect dry time.)
No. Seal-All may be painted over for maximum UV resistance once cured.
Use for distributor caps, interior panels, radiators, gaskets, transmission carburetor floats, body and trunk leaks, battery cables and terminals, generators, tools and much more .
Road Transport Only – NOT FOR EXPRESS
Contains an oxidising agent (when in liquid form) which is restricted by IATA. For this reason it can not be moved by air and all orders containing adhesive will have a Road Transport Only label applied. As such we recommend not choosing Express Post option as this service will be limited by the road only freight service.
- Meet Travis, the New Wizard (sort of) at Beads N Crystals! - January 3, 2024
- Unveiling the Brilliance: Stainless Steel Findings and the Hypoallergenic Advantage - December 11, 2023
- How To Bead For Beginners 101 - July 25, 2022
